Contact Us
Tel: +86-21-65473192
Fax: +86-21-65954562
Mobile: +8615800752472
Email: rissa@shprema.com
Web: www.cohesivebandage-shprema.com
Home > News > Content
The Method Of Using The Foam Tape
Jan 15, 2018

1, before the removal of the surface paste adhesive dust, grease, and keep dry (not even in the rainy day wall wet condition paste). If used to paste the mirror, it is recommended to use alcohol to clean the sticky surface first.

2, the working temperature should not be lower than 10 degrees, otherwise the adhesive tape and the sticky surface can be properly heated by the electric hair dryer.

3, the pressure sensitive adhesive tape will play the best effect after sticking for 24 hours. When the adhesive tape is pressed as far as possible, it should be pressed for 24 hours. If there is no such condition, the vertical adhesion is 24 hours, and the load-bearing object should be supported.